BELT-SANDER FOR WOODEN FLOORS
Leopard
INSTRUCTION MANUAL
Page 5
DANGER:
Use of the machine before it is completely assembled may cause injuries to people
and/or damage to things. Do not use a machine which is not completely assembled.
Keep all fastenings closed. Adjust the machine according to the specifications.
DANGER:
If the power supply circuit trips continuously or it provides insufficient power, there is a
risk of electrocution. Have an authorized electrician check the fuses, protection circuit
and power supply line.
DANGER:
Maintenance or repairs carried out on a machine which is not duly disconnected from
the power supply line may cause electrocution. Disconnect the power line before
carrying out any maintenance work and/or repairs.
DANGER:
Use of this machine connected to a grid without earth may cause electrocution. Never
disconnect or disable the power supply earth conductor. Consult an electrician if the
earth conductor is missing or if you suspect that the system is not suitably earthed.
DANGER:
Use of this machine with a damaged power supply cable may cause electric shock. Do
not use the machine if the power supply cable is damaged. Do not use the power
supply cable for moving the machine.
DANGER:
Injury or electrocution may occur if the machine passes over the power supply cable or
damages it. Keep the cable away from the lower part of the machine in order to avoid
contact with the abrasive. Keep the power supply cable up over the machine.
DANGER:
The moving parts of this machine may cause serious injury and/or damage. Keep
hands, feet and loose clothing away from the moving parts of the sander.
DANGER:
Injury or damage may be caused by using the sander without its guards and covers in
place. Always make sure that all guards and covers are in their places and well
attached.
DANGER:
Carrying out maintenance operations, replacing or adjusting belts, or replacing the dust
bag may cause injury to the operator and/or surrounding people if the machine is
connected to the power supply.
WARNING:
Serious injury or damage may occur if all the instructions on this machine or in this
manual are not read and complied with. Read and abide by all safety instructions. Make
sure that all the plates, transfer printings, warnings, cautions and instructions are fixed
to the machine. New plates may be had from your authorized JANSER retailer.
WARNING:
Clouds of sanding dust may form and be breathed in while the sanding machine is
being used. Always wear a dust mask when using the machine for sanding.
WARNING:
The eyes and/or body may be injured if protective clothing or devices are not worn.
Always wear safety glasses, protective clothing and a dust mask during any sanding
operation.
WARNING:
During sanding operations, loud noises may occur which may damage hearing after
long exposure. Always use acoustic protection during any sanding operation.
