Janome Horizon Memory craft 7700 QCP, Инструкция

Страница: 56 / 96

54
Corded buttonhole
Machine settings
Pattern 23 (Buttonhole)
Thread tension: AUTO
Presser foot: Automatic buttonhole foot R
Foot pressure: 7
With the automatic buttonhole foot R raised, hook the
filler cord on the spur at the back of the buttonhole foot
1 Spur
Bring the ends of the cord toward you under the
buttonhole foot clearing the front end.
Hook the ends of the filler cord into the forks on the front
of the buttonhole foot to hold them tight.
2 Forks
To sew a corded buttonhole, follow the same procedure
as a sensor buttonhole.
Lower the needle into the fabric where the buttonhole will
start and start sewing.
The sewing procedure is the same as the square
(sensor) buttonhole.
Remove the fabric from the machine.
Cut the filler cord at both ends.
To cut the buttonhole opening, refer to page 53.
NOTE:
Set the stitch width in accordance with the thickness of
filler cord used.
1
2