Janome Horizon Memory craft 7700 QCP, Инструкция

Страница: 55 / 96

53
b
Start the machine to sew the buttonhole.
The machine will sew the left row first.
n
Then it goes to the end point with straight stitches.
The machine will sew the back bartack and the right
row.
m
Finally, the machine will sew the front bartack and
stop automatically.
To sew another buttonhole, press the thread cutter button
and raise the presser foot. Move the fabric to where the
next buttonhole is to be sewn, then lower the foot and
start the machine.
Double layer buttonhole
To make a solid and sturdy buttonhole, sew another layer
of buttonhole over the previous stitches.
After the buttonhole is finished, simply start the machine
again. Do not raise the foot or buttonhole lever.
,
When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
11 Buttonhole lever
.
Remove the fabric and place a pin just below the
bartack at each end to prevent accidentally cutting
stitches. Cut the opening with the seam ripper.
12 Pin
13 Seam ripper
NOTE:
If the dual feed device interferes when pressing the red
button, shift the dual feed device away.
14 Dual feed device
11
14
12
13
,
.
n
m
b