Janome Horizon MC8900 QCP Special Edition, Инструкция

Страница: 84 / 112

82
Press the twin needle key and select the desired pattern.
Patterns not suitable for twin needle sewing cannot be
selected.
Buttonholes and specialty stitches such as darning or
eyelet, and monogram cannot be selected.
e
Patterns not suitable for twin needle sewing
r
Twin needle key
t
Twin needle icon
y
Maximum width (3.0)
NOTE:
When you sew patterns with the twin needle, test the
stitches first before you sew on the garment.
Use the zigzag foot A or satin stitch foot F for twin
needle sewing.
Use the threads #60 or finer.
When changing the sewing direction, raise the needle
and presser foot then turn the fabric.
Select the desired pattern suitable for twin needle sewing.
Press the twin needle key.
The LCD screen shows a twin needle icon and the
maximum permissible stitch width is restricted to 3.0 mm.
The needle drop position of straight stitches is restricted
to between 3.0 and 6.0.
After twin needle sewing is finished, replace the twin
needle with a single needle.
r
t
y
e