Janome HD523, Инструкция по эксплуатации

Страница: 8 / 36

6
w
e
q
To Attach and Remove the Presser Foot
To remove
Turn the handwheel toward you to raise the
needle to its highest position. Raise the presser
foot. Press the lever on the back of the foot
holder.
The presser foot will drop off.
q
Lever
To attach
Place the presser foot so the pin on the foot
lines up just under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
w
Groove
e
Pin
CAUTION:
Turn off the power switch when changing the
presser foot.
To Attach and Remove the Foot Holder
q
Setscrew
w
Foot holder
e
Presser bar
To remove
Remove the setscrew
q
by turning it
counterclockwise with a screwdriver.
To attach
Match the hole in the foot holder w with the
threaded hole in the presser bar
e
.
Fit the setscrew
q
into the hole.
Tighten the setscrew
q
by turning it clockwise
with screwdriver.
q
q
w
e