Janome 5300QDC, Инструкция

Страница: 58 / 84

56
Drawn work uses the same method as fringing. Choose
DÀUPZRYHQIDEULFOLNHOLQHQZKHUHWKUHDGVFDQEH
removed easily.
z
Carefully cut the fabric on the grain. Determine the
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
z
x
c
x
6HZGRZQWKHOHIWVLGHJXLGLQJWKHIDEULFVRWKHULJKW
KDQGVWLWFKHVIDOOLQRSHQVSDFH$IWHUÀQLVKLQJWKHOHIW
VLGHWXUQWKHIDEULFDURXQGƒ6HZGRZQWKHRWKHU
side.
c
Remove the yarn or fabric threads between the
stitching.
Drawn Work
q
6WLWFKSDWWHUQ 02'(
w
Thread tension dial: 1 to 4
e
3UHVVHUIRRW 6DWLQVWLWFKIRRW)
4
w e q
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
ÁDQQHO,I\RXXVHOLJKWZHLJKWIDEULFDSSO\DWHDUDZD\
backing for support.
6HZIURPWKHFHQWHURIWKHGHVLJQRXWZDUG
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q
Auto-lock button
Cross Stitch
q
6WLWFKSDWWHUQ 02'(
w
Thread tension dial: 3 to 6
e
3UHVVHUIRRW 6DWLQVWLWFKIRRW)
* The stitch patterns 91-93 in mode 2 can also be used.
4
w e q
q