JanomeFlyer.com
61
SECTION VI. CARE OF YOUR MACHINE
Cleaning the Hook Race and Feed Dog
WARNING:
• Turn the power switch off and unplug the machine
before cleaning.
• Do not dismantle the machine other than as explained
in this section.
CAUTION:
Do not store the machine in a high-humidity area,
near a heat radiator, or in direct sunlight.
q
w
y
r
y
r
u
t
i
z
x
c
v
b
z
x
c
Installing the Bobbin Holder
z
Insert the bobbin holder
q
so that the knob
e
fits
next to the stopper
w
on the hook race.
x
Insert the bobbin.
c
Attach the needle plate with the setscrews
t
.
After
cleaning the machine, make sure the needle and
presser foot are attached.
q
Bobbin holder
w
Stopper
e
Knob
r
Screwdriver
t
Setscrews
Press the needle up/down button to raise the needle,
then unplug the sewing machine.
Remove the needle and presser foot.
z
Remove the setscrews
w
on the left hand side of the
needle plate
e
with the screwdriver
q
supplied with
the machine. Remove the needle plate
e
.
x
Remove the bobbin. Lift up the bobbin holder
y
and
remove it.
c
Clean the bobbin holder
y
with a lint brush
r
.
v
Clean the feed dog
u
, thread cutter mechanism
t
and hook race
i
with the lint brush.
b
Clean the center of the hook race with a dry cloth.
q
Screwdriver
w
Setscrews
e
Needle plate
r
Lint brush
t
Thread cutter mechanism
y
Bobbin holder
u
Feed dog
i
Hook race
* You may also use a vacuum cleaner.
NOTE:
Clean the outside of the machine with a soft cloth and
neutral soap.
After cleaning the machine, make sure the needle and
presser foot are attached.
r
w
e
q
e
t
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
