JanomeFlyer.com
7
y
t
u
i
o
!0
t
Needle up/down button
Press the needle up/down button
t
to bring the
needle up or down.
y
Thread cutter button
Press the thread cutter button
y
to trim the threads
after sewing.
The thread cutter mark will blink
i
while the machine
cuts the threads.
You can continue sewing without pulling the bobbin
thread up after trimming the threads.
To trim the threads automatically after sewing, select
the desired stitch pattern, then press and hold the
thread cutter button until the thread cutter mark
appears
o
.
The machine will trim the threads automatically after
the locking stitch then stop when the reverse or auto-
lock button is pressed, or a pattern has the auto-lock
stitch programmed.
NOTE:
Use the thread cutter on the face cover if the thread is
#30 or thicker.
u
Twin needle button
Press the twin needle button
u
when using a twin
needle. The twin needle mark
!0
will appear when it is
activated.
To cancel or finish the twin needle sewing, press the
twin needle button twice.
NOTE:
When the twin needle mark is blinking, all the other
keys and buttons will not be responding. Press the
twin needle button again.
For twin needle sewing, please refer to page 48.
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
