JanomeFlyer.com
32
z
x
c
• Bridge stitch
Patterns #55 to #58 in mode 3 are extender stitches
which are used to insert straight stitches after a stitch
pattern.
The extender stitches #57 and #58 inherit the stitch
length and needle drop position of a previous pattern
in programmed pattern combination. To see more
detailed information about extender stitch, please
refer to page 51.
Example:
Inserting 2 counts of the straight stitch after
a stitch pattern.
z
Select pattern 10 (mode 2).
Press the memory key.
Pattern 10 is memorized.
x
Select pattern 57 (mode 3).
Press the memory key.
Pattern 57 (2 counts of straight stitch) is
memorized.
c
Two counts of straight stitch are inserted between
blind stitches.
q
e
w
r
Button Sewing
q
Stitch pattern:
MODE 1:
7
w
Needle thread tension:
3 to 7
e
Presser foot:
Satin stitch foot F
r
Feed
dog:
Dropped
z
Lower the feed dog.
x
Match the holes of button to the horizontal slot on the
presser foot.
c
Lower the foot to hold the button in place.
v
Adjust the stitch width so the needle will enter the left
hole of the button.
b
Turn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n
Stitch several times.
z x c v b n
m ,
m
After you finish sewing, cut the threads but leave 3˝ to
4˝ of threads at the end.
,
With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dogs for normal sewing.
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
