JanomeFlyer.com
51
Bridge Stitches
Patterns #55 to #58 ( ) in mode 3 are bridge
stitches which are used to insert straight stitches
between stitch patterns.
The bridge stitches #57 and #58 use the stitch length
and needle drop position of the previous pattern in the
programmed pattern combination.
The needle drop position and stitch length of patterns
#55 (mode 3) and #56 (mode 3) can be adjusted.
However, the needle drop position and stitch length of
patterns #57 (mode 3) and #58 (mode 3) cannot be
adjusted. The needle drop position and stitch length
remain same as the previous pattern.
Example: Patterns #22 and #57 (mode 3)
z
Select pattern 22 (mode 3).
x
Press the memory key.
c
Select pattern 57 (mode 3).
v
Press the memory key.
q
z
x
c
v
b
b
Start sewing. Two counts of straight stitch
q
are
inserted between the stitch pattern 22.
NOTE:
Use bridge stitch patterns #55 or #56 when the stitch
length of the previous stitch pattern is too fine (such
as satin stitches).
• To insert a space between patterns
Example:
Patterns #64 and #91
z
Select pattern 64 (mode 3).
x
Press the memory key.
c
Select pattern 91 (mode 3).
v
Press the memory key.
b
Start sewing. A 5 mm space will be inserted
between the patterns.
Spaces (Default stitch length)
Pattern #91 (Mode 3)
5 mm
Pattern #97 (Mode 4 and 6)
2.5 mm
Pattern #98 (Mode 4 and 6)
3.5 mm
Pattern #99 (Mode 4 and 6)
5 mm
NOTE:
The space can be varied from 0.5 to 5.0 by adjusting
its stitch length.
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide
