www.toews.com
36
•
Threading the Upper Looper
Place a spool of thread on the spool pin second from
the right.
*
The points to thread for upper looper are marked
in red.
*
A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the right from back to front.
*
If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
Thread guide
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
Thread guide plate
3. Pass the thread through the left side of looper
thread guide sliding the thread from right to left.
Looper thread guide
1
2
3
(A)
(B)
1
2
3
4
5
6
9
1
2
3
1
2
3
8
7
Janome 3434D Instruction Manual
Janome Serger 3434D
www.toews.com
3434D Owners Manual/ User Guide
