janitza UMG507, Установка и первый запуск

Страница: 20 / 48

20
SELECT mode
Additional information such as the Date and
Time can be called up directly in the meas-
ured value displays for various values and
the min and max values can be individually
deleted.
Measured value displays
After the power supply has been restored
the UMG507 always displays the first pro-
grammed measured value display. Up to three
measured values can be shown simultane-
ously in the UMG507‘s display.
The Keys 2 and 3 can be used to page be-
tween the measured value displays. In order
to keep the display of the selection of meas-
ured values to be displayed clear, only part of
the avaialable measured values are prepro-
grammed for call up in the measured value
display in the factory.
If other measured values are required in the
UMG507‘s display, these can be selected on
a PC using the programming and readout
software
PSWbasic included in the scope
of supply and can then be transferred to the
UNG507 through the serial interface.
Display example:
Voltages L1-N, L2-
N, L3-N.
Operation
V
V
V
L3
L1
L2
2
3
Mean
value
Min value
Max value
Power de-
mand
Display averaging time.
Delete mean value.
Display Date and Time.
Delete min value.
Display Date and Time.
Delete max value.
Display running time.
2
3
2
3
2
2
3
Example: Delete max current value in L3.
1
Use keys 2 and
3 to page up to
the max current
value.
Press 2 times.
Select phase.
A
2
Press once.
Select display.
3
Press once.
Delete max
value.
L1
SELECT
L2
L3
A
A
A
SELECT
L3
A
SELECT
L3
A