janitza UMG 96-S2, Руководство пользователя и технические данные

Страница: 35 / 66

www.janitza.com UMG 96-S2
35
11.3 Parameter (addresses) and measured
value display
11.3.1 Parameter (addresses)
All parameters required for the device, such as
current transformer data, voltage transformer data
and a selection of frequently required measured
values, can be found in chap. „18.2 Parameter
and Modbus address list“ on page 62.
The contents of most parameter addresses are
reached via the serial interface (RS485), e.g. with
a connected PC with the GridVis
®
software or with
keys 1 and 2 on the device.
Parameter addresses (3-digit) are configured in
programming mode.
11.3.2 “Parameter address” example display
The display of the device shows the parameter
address for the device address of the device
within an RS485 bus structure.
11.3.3 Measured value display
The device summarizes selected measured
values in 3 measured value display profiles. The
measured values appear in the display mode of
the device depending on the set display profile
(address 037).
In addition to the measured value display profiles,
the device has the option of selecting measured
value profiles for an automatic display change
(address 038).
The measured value display profiles and the
automatic display change profiles are read and
changed via the serial interface (RS485), e.g. with
a connected PC (GridVis
® software) or with keys 1
and 2 on the device. For additional information on
this, see chap. „14. Measured value display and
automatic display change profile“ on page 44.
11.3.4 Example of measured value display
The display of the device shows the voltages (L-N)
each at 230 V. The transistor output K1 conducts
and current can flow.
Parameter address
Programming mode
Address of the
device in the RS485
bus structure.
Fig. Parameter address example display
Voltage L1-N
Voltage L2-N
Voltage L3-N
Unit for the
voltage
Output K1 active
Fig. Example of measured value display
NOTE
The measured value display and the display
change profile are easily configured via the
GridVis
®
network visualization software!