janitza UMG 96-PA, Руководство пользователя и технические данные

Страница: 41 / 84

www.janitza.com UMG 96-PA / UMG 96-PA
MID
41
12.5 Display
Adjust the device’s display settings from this
menu item:
·Brightness
·Standby after
·Brightness (st. by)
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·Using keys 3 (

) and 4 (

) select the menu
item “ DFsplay ”.
·Confirm using key 6 (Enter).
·With keys 3 (

) and 4 (

)select the desired
submenu and confirm with key 6 (Enter).
·With keys 2 to 5 (

) select the display
value.
Using keys 2 (

) and 5 (

) set the number
positions.
Using keys 3 (

) and 4 (

) to change the
number (-1 / +1).
·Confirm your entries with key 6 (Enter) or
terminate the action with key 1 (Esc).
·Exit the “DFsplay” menu by pressing key 1 (Esc).
·Exit the configuration menu by pressing key 1
(Esc).
·Press key 1 (Esc) to open the main menu.
·Select the desired measured value display with
keys 3 (

) and 4 (

) .
·Confirm the selection with key 6 (Enter)
or switch to the measured value display
“OvervFew” by pressing key 1 (Esc).
Restart
Proceed as follows to restart the device manually:
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·Using keys 3 (

) and 4 (

) select the menu
item “ System ” from the configuration menu.
·Confirm using key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the submenu
“ Reset ” and confirm with key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the function
“ Restart ” and confirm with key 6 (Enter).
·Using the keys 3 (

) and 4 (

) select the
desired option “ Yes” or “ No ”.
·Confirm your entries with key 6 (Enter) or
terminate the action with key 1 (Esc).
·The device restarts.
Fig. “Restart” menus, restart the devFce
Fig. “DFsplay” menu