janitza UMG 96-PA, Руководство пользователя и технические данные

Страница: 39 / 84

www.janitza.com UMG 96-PA / UMG 96-PA
MID
39
Setting the password:
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·Using keys 3 (

) and 4 (

) select the menu
item “ System ” from the configuration menu.
·Confirm using key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the submenu
“ Password ” and confirm by pressing key 6
(Enter).
·Use keys 2 to 5 (

) to set the desired
password.With keys 2 (

) and 5 (

) set the
numbers position.
Using keys 3 (

) and 4 (

) to change the
number (-1 / +1).
·Confirm your entries with key 6 (Enter) or cancel
the action with key 1 (Esc).
·Exit the view “ System ” by pressing key 1 (Esc).
·Exit the configuration menu by pressing key 1
(Esc).
·Press key 1 (Esc) to open the main menu.
·Select the desired measured value display with
keys 3 (

) and 4 (

) . Confirm the selection
with key 6 (Enter) or navigate directly to the
measured value display
“OvervFew” by pressing
key 1 (Esc).
NOTE
In addition to changes to the current and
voltage transformer ratios, the
UMG 96-PA
MID
also stores each
password change
in the
integrated log. The device blocks password
configuration after 48 entries in the log.
12.4.4 Reset
Measured values and device parameters are
deleted and reset with this function.
Energy
You can delete all energy meters in the device at
the same time. It is not possible to select specific
energy meters.
NOTE
When resetting the UMG 96-PA
MID
, the certified
energy values active energy can be supplies
and pulled (device parameters 6444 and 6448),
but not deleted!
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·With keys 3 (

) and 4 (

) select the menu item
“ System ” and confirm with key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the submenu
“ Reset ” and confirm with key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the desired
function.
·Confirm the entries with key 6.
Fig. DFsplay “Reset”, Reset the eneriy meter
Fig. Screen “System”, selectFon “Password”
·Using the keys 3 (

) and 4 (

) select the
desired option “ Yes” or “ No ”.
·Confirm your entries with key 6 (Enter) or
terminate the action with key 1 (Esc).
·Exit the view “ Reset ” by pressing key 1 (Esc).
·Exit the view “ System ” by pressing key 1 (Esc).
·Exit the configuration menu by pressing key 1
(Esc).
·Press key 1 (Esc) to open the main menu.
·Select the desired measured value display with
keys 3 (

) and 4 (

) and confirm with key 6
(Enter) or switch to the measured value display
“
OvervFew ” with key 1 (Esc).