MAINTAINING THE WALKER
Cleaning the walker: Clean the plastic parts with a damp cloth, soap and water.
Washing the cover: Wash it by hand and leave it to dry at room temperature.
This electronic device must be recycled according to the directive 2002/96/CE.
All electrical or electronic apparatus must be correctly disposed of in collection points designated by
local authorities.
INSTALLING THE ACTIVITY TRAY
Insert 2 AA (1.5V) batteries as indicated on the cover.
To change the batteries:
-Remove the screw and cover, then take out the old batteries.
-Insert 2 AA (1.5V) batteries as indicated on the cover.
-Close the cover and tighten the screw correctly.
WARNING:
-Attention! The batteries must only be changed by an adult.
-Keep batteries away from children at all times.
-Batteries or rechargeable batteries must be set up by respecting
the polarity.
-Do not mix new and used batteries or rechargeable batteries.
Do not mix battery types.
-Non rechargeable batteries must not be recharged.
-Rechargeable batteries must be removed from the toy before
charging wherever possible.
-Rechargeable batteries should only be changed
under adult supervision.
-Remove used batteries or rechargeable batteries
from the toy.
-Do not short circuit battery terminals.
-Keep packaging outside the reach of children.
-Keep these instructions for future reference.
-The activity tray should be assembled by an
adult.
7
1
2
OK
)
B
(
)
A
(
OK
The activity tray should be assembled by an adult.
To attach the tray to the upper base of the walker, position the tray so that the slots on the bottom of the tray
are facing the upper base of the walker (A).
On the bottom of the upper base of the walker there are two supports that should be turned so they are horizontal
instead of vertical. Make sure that the activity tray is securely fastened (B).
GUARANTEE INFORMATION
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations in force on guarantees
for consumer goods applicable to the European Union and those of the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller of the item or, failing that,
through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations and instructions for use and
maintenance provided, or due to wear and tear caused by normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn off under any circumstances as it contains information relevant
to the guarantee.
