Page 20
ENGLISH
Jandy
®
UV Medium Pressure | Installation & Operation Manual
Heatsink Temperature
Reset
Ballast Air Temperature
Anomalous Input Voltage
Hardware Error
Fan Failure
Ballast State
Lamp Electrical Parameters
Lamp Error
Lamp Rated Power
Lamp Ignitions
Reignition Failure After 5 Minutes
Reignition Failure After 2 Minutes
Lamp Short Circuit
Lamp in Open Circuit or Hot
Figure 13. Diagnostics Screen
4.7 System Event Log
To access the system event log, press the
“Diagnostics”
key. The system accesses
the diagnostic screens both of the electronic
ballast and the UV lamp power circuit
discussed in Section 6.6.
Pressing the navigation key at the top right of
the screen, you will access the log screen of
certain system events from its connection.
4.8 System Auxiliary Parameters
Configuration
The
“Configuration”
screen allows to modify several
auxiliary parameters of the system.
To access the
“Configuration”
screen,
press the
“Diagnostics”
button. The system
accesses the diagnostic screens both of the
electronic ballast and the UV lamp power
circuit discussed in Section 6.6.
Repeatedly pressing the navigation key
located on the top right of the screen, the
“Configuration”
screen will appear.