background image

H0342800 Rev-

 Replacement Kit Instructions

Jandy

® 

AquaPure

®

 Ei

TM

 Series Replacement Kits

for Models APURE35PLG/35PLGC

These instructions are to be used with the following Jandy

 

Replacement Parts:

R0511100 -- R-Kit, Power Pack, 120V Plugged Version

1.  Introduction

 

This document gives instructions for replacing 

the power pack on the Jandy AquaPure Ei chlorine 

generating device. 

 

The instructions were written with safety as the 

priority and must be followed exactly. Not following the 

written procedure or taking shortcuts may increase the 

risk of personal injury. Read through the instructions 

completely before starting the procedure. 

 

For technical assistance, please contact our 

Technical Support Department at 1.800.822.7933.

2. Ordering Information

 

To order or purchase parts for the Jandy AquaPure 

Ei chlorine generating device, contact your nearest 

Jandy dealer or distributor. If they cannot supply you 

with what you need, call Zodiac Pool Systems, Inc. at 

1.800.822.7933.  In Canada call Zodiac Pool Systems 

Canada, Inc. Customer Support Department at  

1.888.647.4004. 

Figure 1. 

Power Pack R-Kit

Power Pack, 120V 

Plugged Version 

(R0511100)

Disconnect power to the system by uplugging 

the power pack before performing this procedure 

to avoid risk of electric shock which can result in 

property damage, severe injury or death. 

WARNING

WARNING

FOR YOUR SAFETY - For anything other than the routine cleaning and maintenance described 

in this manual, this product must be serviced by a contractor who is licensed and qualified in 

pool equipment by the jurisdiction in which the product will be installed where such state or 

local requirements exists. In the event no such state or local requirement exists, the installer 

or maintainer must be a professional with sufficient experience in pool equipment installation 

and maintenance so that all of the instructions in this manual can be followed exactly. Before 

installing this product, read and follow all warning notices and instructions that accompany 

this product. Failure to follow warning notices and instructions may result in property damage, 

personal injury, or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause 

serious injury, property damage, or death. 

3. Replacing the Power Pack

Отзывы: