manualshive.com logo in svg

Jandy Pro Series JXi 200, Руководство по установке

Поделиться
Скачать
Jandy Pro Series JXi 200 Скачать руководство пользователя страница 27

Page 27

 JXi

™ 

Gas Conversion / Replacement Instructions

Section 2:  ORIFICE REPLACEMENT 

Instructions

These instructions are for replacing parts with identical BTU and fuel 

type:

•  Gas Orifice

•  Air Intake Orifice 

You will need the following tools for REPLACEMENT:

•  Digital Differential Pressure Manometer

•  Manometer Accessories (hoses, tee, fittings)

•  Blunt Tool (Key or Phillips Head Screwdriver)

•  Pipe Wrench

•  Second Pipe Wrench for Removing Gas Union

IMPORTANT:  READ BEFORE YOU START 

The fuel orifice kit contains critical replacement parts required to 

ensure safe reliable operation of the JXi

™

 model heater for either fuel 

orifice replacement or fuel type conversion. Please note that not all 

parts included in the kit will be used for orifice replacement. Some of 

the items are used only for the conversion procedure. It is critical that 

the parts used for orifice replacement are for the fuel type specified 

(either natural gas or propane) and are installed correctly according to 

the instructions in this manual. 

NOTE:

 The design of the JXi heater allows the same gas valve to be 

used for both natural gas and propane models.

1. Gas Orifice

 

The orifice is specific for each BTU and for fuel type. Ensure you have 

the correct gas orifice for the BTU and fuel type required by checking 

the part number factory-stamped on the gas orifice against Gas Orifice 

Markings column, Table 2. In addition, it is critical that the O-ring used 

is the one provided by Zodiac

®  

in this kit and is BUNA-N type (no 

substitutions). 

Содержание JXi 200









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды