Jands Vista T4, Руководство пользователя

Страница: 253 / 308

Appendix 7, Using serial communication to control cuelists Playback commands
PC (Windows) systems should be set the same way but the Com port can be
changed to suit your computer’s configuration
O t
dropd
Playback commands
text followed by
The syntax for sending commands is:
This command… does this…
n Mac systems the Keyspan 19HS device will appear in the Serial Por
own menu.
All commands should be sent to the Vista as single lines of
Return or Enter.
With serial commands you can only play the next cue in a cuelist. It is not
possible to play a play a cue out of order.
Command {Cuelist ID} or {Name} or {Cuelist ID:Name}
Command The supported commands to playback and load shows:
Go Plays the next cue in the cuelist. Examples:
Go 1, or Go Dimmers, or Go 1:Dimmers
Pause {ID or
Name or
ID:Name} Halts playback of the specified Cue
Pause 5 list. Example:
Rego {ID or
Name or
ID:Name} Resumes play of a paused Cuelist. Example:
Rego 5
Release Releases playback of
Release 1 the specified Cuelist. Example:
Load {show
filename} Loads a show
be specified. Example:
Load C:\ file. The full path to show showfile must
Setting fixture levels
You can also send commands to set Fixture levels in the Programmer . The
Syntax is:
•
{fixture id(s)} @ {level}
Where the fixture id is any combination of number, +, > and minus and level is a
value between 0 and 100 or just f (or F) for full.
Vista User Guide, Version 2 20 ‐ 39