Jands Vista T4, Руководство пользователя

Страница: 292 / 308

Removing and installing the Duo Switch Appendix 10 – the touchpad and the pen tablet
To insert a new tip:
Slide it straight into the barrel of the pen.
new tip will slide into the correct position.
If the pen tip wears and becomes an
tablet display screen. To avoid this, pe
Firmly push the tip until it stops. The
gular, it may damage the coating on the Pen
riodic tip replacement is recommended.
wing the pen tip or side switch. The
be pulled out if children are biting on
installing the Duo Switch
ome users prefer to remove the DuoSwitch when working with the Grip Pen.
For example, you may want to remove the switch in order to focus on a drawing
utton functionality it offers. For most users it is unnecessary to
uoSwitch.
Important: Do not remove the switch by prying it from either end as this may
immer capacitor that will be visible when
tch, always
er to protect the
1.
Firmly clasp D
rubberized g i
2.
Remove the p t rip
forward over the
3.
Install the op de
the grip and push ip. Then replace the pen tip cone
WARNING Prevent children from swallo
pen tip or side switch may accidentally
them.
Removing and
S
and eliminate any accidental clicks that would occur if you unintentionally
pressed on the switch. Note, however, that removing the DuoSwitch also
removes the b
remove the D
damage your Pen. NEVER adjust the tr
the switch is removed. When using the pen without the DuoSwi
replace the original rubberized grip with the optional grip in ord
trimmer capacitor.
To remove the DuoSwitch:
the uoSwitch in the middle and pull out. Press in on the
rip n order to better grasp the switch.
en ip cone by turning it counterclockwise. Then pull the g
pen tip.
tional grip by aligning the pen case rails with the grooves insi
ing the grip over the pen t
by turning it clockwise onto the pen.
23 ‐ 78 Vista User Guide, Version 2