J&D MAnufacturing JD-MV1, Инструкция по установке и эксплуатации

Страница: 2 / 12

JD-MV1
Page 2
This guide will inform the electrician on proper wiring and installation procedures
and, will also inform the user on how to use the JD-MV1 controller.
The manufacturer recommends that the following installation instructions be
followed to as closely as possible, and that all work be performed by a certified
electrician. Failure to do so may void the warranty.
Description
The JD-MV1 controller is designed to control manually a variable speed output.
An ON/OFF Switch is used to activate or not the output and a Speed Selector is
used to adjust the speed of the variable output. The controller operates on
115/230V and 50/60Hz.
The JD-MV1 comes in a PVC non-corrosive enclosure that is protected from dust
and humidity. The JD-MV1 is covered by a complete two-year warranty.
Unpacking
Unpack the JD-MV1 module and inspect contents for damage. Should the
contents appear to be damaged, contact your local distributor to return the
material.
The package should contain the following standard items:
1 JD-MV1
1 Installation / User’s guide
Mounting hardware required
This is the list of the mounting hardware needed, which is not included with the
product:
Screws (to mount the module on the wall)
Screwdriver
Soldering iron kit or approved sealed connectors