Wireless Network Connection
HT1
User Manual
Janam Technologies LLC Version 1, September 2020
Wireless Network Connection 4—2
Connecting the Janam HT1 to a Wireless Local Area Network (WLAN)
To initially connect the HT1 to a wireless local area network, go to
Settings
>
Network & internet
>
WLAN
. Turn
WLAN networking
on. The XT2 will begin searching for available Wi-Fi networks.
After a few seconds it will list what it has found, including the approximate signal strength and
whether or not a network is secured by a password or not. Tap on your preferred network. Enter the
password. The connection will be established. Upon successful completion, the network link will show
up as
Connected
.
Tap on the network you
are connected to show
connection information
(signal strength, link
speed, frequency and
type of security). You
may also opt to
forget
this network.
In
Settings
>
Net-
work & internet
you
may also tap on
Data
Usage
to see how
much data you used in
a given time span. Tap
Wi-Fi data usage
to
see how much data was
used overall and by
each active app.
