James Rebarscope R-C-400 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 76

background image

68

www.ndtJames.com

c.

Warranty Claims

i.

For Warranty Claim Processing

James

®

has established James

®

organizations in the

Americas, and Europe. Please visit the James

®

web site

www.ndtJames.com

for latest address and contact

information for the James

®

organization nearest you.

3.

Regulatory Laws and/or Standards

The  performance  of  the  parties  hereto  is  subject  to  the  applicable  laws  of
the  United  States.  The  Company  takes  reasonable  steps  to  keep  its
products  in  conformity  with  various  nationally  recognized  standards  and  such
regulations,  which may affect its products. However, the Company recognizes
that  its  products  are  utilized  in  many  regulated  applications  and  that  from
time  to  time  standards  and  regulations  are  in  conflict  with  each  other.  The
Company makes  no promise or representation that its product will conform to
any  federal,  provincial,  state  or  local  laws,  ordinances,  regulations,  codes  or
standards  except  as  particularly  specified  and  agreed  upon  for  compliance  in
writing  as  a  part  of  the  contract  between  Buyer  and  the  Company.  The
Company prices can  not include the cost of any related inspections or permits
or inspection fees.

4.

Notices

Notice  by  either  the  Company  or  Buyer  will  be  made  only  by  facsimile  or
similar  electronic  transmission,  effective  on  the  first  business  day  after
confirmed  receipt,  or  by  letter  addressed  to  the)  other  party  at  its  address  as
provided  in  this  Agreement,  effective  three  (3)  business  days  after  deposit
with  the  U.S.  Postal Services, postage prepaid, or one (1) business day after
deposit with a  recognized overnight express service.

5.

Interpretation

Should  any  term  or  provision  contained  In  the  contract  contravene  or  be
invalid  under  applicable  law,  the  contract  shall  not  fail  by  reason  thereof  but
shall  be  construed  in  the  same  manner  as  if  such  term  or  provision  had  not
appeared  therein.

6.

Assignability

Neither  this  contract  nor  any  claim  arising  directly  or  indirectly  out  of  or  in
connection  herewith  shall  be  assignable  by  Buyer  or  by  operation    of    law,
without  the  prior  written consent  of  Company.  This  document shall  be  binding
upon  and  inure  to  the  benefit  of  each  party  hereto  and  their  respective
permitted successors and assigns.

«
...
71
72
73
74
75
...
»

Содержание Rebarscope R-C-400













































































Отзывы:

Нет отзывов

Похожие инструкции для Rebarscope R-C-400

Precision2 HP2 Series

Бренд: B-K lighting Страницы: 6

Бренд: Zero Hand Truck Страницы: 38

Бренд: B-K lighting Страницы: 3

Бренд: Gardigo Страницы: 24

Бренд: Gardner Bender Страницы: 8

Бренд: Garantia Страницы: 4

Бренд: NARIKA Страницы: 2

Бренд: ParaBody Страницы: 6

Бренд: ParaBody Страницы: 11

Бренд: Valmar Страницы: 78

Бренд: Valhalla Scientific Страницы: 64

Бренд: Pani Страницы: 12

Бренд: FASTER TOOLS Страницы: 19

Бренд: Össur Страницы: 98

Flex Foot Cheetah

Бренд: Össur Страницы: 107

Бренд: Össur Страницы: 38

Бренд: Össur Страницы: 39

Bionic Symbionic Leg

Бренд: Össur Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды