Safety Information
3
General Information
3
Technical data
3
Certifi cate of Conformity
5
Communications Regulations
5
Disposal information
5
Box contents
5
Features 5
Recommended Tools
6
Caution 6
Safe control operation
7/8
Practicing 8
Trouble shooting
8
Cautions during operations
9
Charging of battery pack
9
Transmitter 2 Channel
10-16
Controller 17-19
Instructions for the use of NiMh Batteries
21
First Step
22
Assembly 23-28
Spare parts
29-31
Tuning parts and accessories
31
3
Content
Safety Information
Models are not toys, and should only be operated by responsible
clear thinking people. Assembling and maintaining models requires
a basic level of technical skill, and a sensible logical approach. Any
error in building, repairing or maintaining the model could result in
serious injury or damage.
Technical problems or an incorrectly assembled model may lead to
the motor unexpectedly beginning to turn. Always stay out of the
vicinity of rotating parts and never allow any item to come into
contact with a spinning wheel. As neither the manufacturer or the
dealer has any influence over the way that models are operated
they can accept no responsibility for and damage caused.
If this model is the first radio controlled model which you are att-
empting to build or drive, you should secure the assistance of an
experienced model pilot.
Never operate the model in a way which may endanger people or
animals. Before your first drive you should conduct a range check
of the radio control system, secure the model to a solid object, and
ensure that you have full control of all functions with the antenna
collapsed over a distance of at least 25 metres.
Before and after every drive inspect the model for damage, and
rectify any faults before you attempt to take off. The operator is
responsible for any damage caused by the operation of models.
Always observe any local laws regarding the operation of model. To
operate the model, the transmitter must be switched on first, and
then the model power supply connected. To turn the model off, re-
verse the procedure. It is illegal to operate radio controlled models
without third party liability insurance. You must ensure that you are
adequately covered before you drive the model.
Furthermore, the following instructions must be followed:
- The kit contains small parts which may cause choking if
swallowed, keep away from small children.
- The model should not be changed in any way, doing so
will invalidate the guarantee.
- Never come into contact with rotating parts.
- Do not expose the model or batteries to direct sunlight,
always keep them in the shade.
- Inspect the model before and after every drive for
damage.
- Only ever drive the model if it is in perfect working order.
- The model can only be used in good weather.
Do not drive in wind, rain or thunder storms.
- Find a place to drive which complies with any laws, and is
free from obstacles such as trees or houses.
- Remember that your model is made from such materials
as plastic and wood, and as such is inflammable. Keep
it away from any open flame, or high temperatures.
- When operating the model, switch on the transmitter
first and then the model, switch off in the reverse order.
- Always ensure that the throttle stick is in the low position
before you switch on.
General Information
Technical data
As the company JAMARA e. K. has no influence over the use, main-
tenance or conditions under which our products will operate, we
accept no responsibility for any damage caused be it of a physical,
financial or theoretical nature. JAMARA e. K. will accept no claim
against it which results directly or indirectly from the operation or
use of ist products.
Your Statutory Rights apply, any claim made against us will be based
solely on the retail price of the product, and limited to the model
only. This will not apply if we are proved to be legally responsible or
when gross negligence can be proved.
Dimensions
approx. 420 x 335 x 225 mm
Weight
approx. ca. 1800 g
Scale 1:10
4 WD
Transmitter
2 channel
Motor B3650
Attention!
Switch the transmitter on first then the model. When you are
finished first switch off the model then the transmitter.
