READ THESE
IMPORTANT INSTRUCTIONS
BEFORE REMOVING THE SECURITY BAND
To avoid damage to the electronics within the Control Panel
It is strongly recommended that you use the knockouts
provided for the entrance of Cables.
If you have to drill holes for cables to enter the Control
Panel, special care must be taken to ensure that drill bits
do not penetrate far enough to touch the Printed Circuit
Boards or any component.
You must ensure that any swarf from the drilling is
completely removed from the Control Panel.
FAILURE to adhere to the above may invalidate your
Warranty.
AUTHORISED AGENT
J.A.M. Limited
39 Brook Road, Rayleigh TEL: +44 (0) 1268 777222
Essex, SS6 7XJ, England FAX: +44 (0) 1268 777221
Web Site : www.jam.uk.com – E-Mail : [email protected]
‘aqualarm’, ‘LeakSense’, ’aqualarm OneTouch’ & ’i-Zone’ are
registered Trade Marks of J.A.M. Limited, England
JUNE 2009
- 24 -
