JAI SW-4010Q-MCL-M52, Руководство пользователя

Страница: 57 / 108

SW-4010Q-MCL-M52 User Manual (Tentative) Main Functions
- 57 -
To Use the Shading Correction Function
The function is turned ON/OFF via serial communication. This function is not dependent on the
operation mode but is effective when used during actual use.
Note: You can save the setting, and have it applied whenever the power is subsequently
turned on. For details on saving the setting, see Step 7: Save the Settings .
RGB
1. Select the shading correction mode ( FlatShading or ColorShading ) in
ShadingCorrectionMode .
2. In ShadingMode , select the user area (User1 - 3) where you save the shading correction
data.
Note: You cannot perform calibration when Off is selected.
3. Display a white chart under a uniform light and execute PerformShadingCalibration .
SWIR
The correction mode is fixed to FlatShading
1. In SWIRShadingCorrect , select User where you save the shading correction data.
Note: You cannot perform calibration when Off or Factory is selected.
2. Display a white chart under a uniform light and execute SWIRShadingCalibration .
Black Level Correction
Related Setting Items: AnalogControl , SWIRAnalogControl
Black level correction is a function for adjusting the setup level. When this function is used, the
following is performed for the gain mode setting.
RGB SWIR
All: –133 ~ +255 LSB@12-bit
All: - 256 ~ + 255 LSB@12bit Red: –64 ~ +64 LSB@12-bit
Blue: –64 ~ +64 LSB@12-bit
Note: For more information see Adjust the Black Level .