JAI SW-4000TL-10GE, Руководство пользователя

Страница: 56 / 64

Effective pixels 3×4096 pixel (R, G, B)
pixel size
7.5 μ m × 7.5 μ m
RGB8 66Hz* 〜66kHz ( 0.1Hz/step )
ROI(Horizontal)/Binning
Binning Hrizontal1(Off)
Width : 16 〜 4096 pixels (16 pixels/step )
OffsetX : 0 〜 4080 pixels (16 pixels/step )
Binning Hrizontal2(On)
Width : 8 〜 2048 pixels ( 8 pixels/step )
OffsetX : 0 〜 2040 pixels ( 8 pixels/step )
ROI(Vertical)
Hieght : 1 〜 4096 lines ( 1 line/step )
Offset : 0 〜 4095 lines ( 1 line/step )
Pixel Format
RGB8, RGB10V1Packed, RGB10p32,
YUV422_8, YUV422_8_UYVY
Off Line Period - 3.29μs + 0.85μs ( 1.0 μ s/step )
Timed 3.0μs 〜 15.149ms ( 1.0 μ s/step )
Trigger Width 1.8μs 〜 1s ( 1.0 μ s/step ) (Trigger Width + 0.85μs)
Acquisition AcquisitionStart / AcquisitionEnd
Exposure FrameStart / LineStart
Transfer FrameTransferStart
Video S/N ratio 55 dB or more (when Gain = 0 dB)
Object illuminance (min.)
220 lx
(Gain 18 dB, Line period 525 μs, 50% video, Light source White LED7800K)
Responsivity
127 DN/nJ/cm2, Mode A
(G channel, 10-bit @ 550 nm, 0 dB gain)
Trigger inputs
Digital image output format
Acquistion Mode
Exposure Mode
SingleFrame, MultiFrame, Continuous
Item SW-4000TL-10GE
Image sensor
4K high speed trilinear CMOS image sensor
Line rate
Synchronization Internal
Communication Interface
10GBase-T, 5GBase-T, 2.5GBase-T, 1000Base-T
Manual
DigitalAll －133 〜＋ 255 (LSB@12bit)
DigitalRed －64 〜 ＋64 (LSB@12bit)
DigitalBlue －64 〜 ＋64 (LSB@12bit)
Default setting: Output black level at 0 (33LSB during 10-bit)
Analog Base Gain：0dB、6dB、12dB
Digtal ： IndividualGainMode Off : Digital All x 1 〜 x 8 ( 0dB 〜18dB)
Digital Red x 0.4 〜 x 4 (-7.96dB 〜 12dB)
Digital Blue x 0.4 〜 x 4 (-7.96dB 〜 12dB)
IndividualGainMode On： Digital Green x 1 〜 x 16 (0dB 〜 24dB)
Digital Red x 1 〜 x 16 (0dB 〜 24dB)
Digital Blue x 1 〜 x 16 (0dB 〜 24dB)
Black level adjustment
Trigger Selector
Gain adjustment
Line4(TTL In1), Line5(Opt IN1), Line10(TTL In2), Line13(TTL In3), PulseGenerator0-3,
UserOutput0-3, Action0-3, LogicBlock0-1, EncoderTrigger
12-pin: TTL input, OPT input 10-pin: TTL input
Positive / negative logic switchable.
Minimum trigger width: 50ns and more
SW-4000TL-10GE
— 56 —
Specifications
*) When taking a trigger signal from the outside, there is no limitation on the minimum value.