JAI SW-4000TL-10GE, Руководство пользователя

Страница: 54 / 64

Setting range Default value Description
Correct variations due to sensors and lenses.
Off, Default, User1,
User2, User3 Default Select the user area to which to save the black level correction value.
ー ー Generate black level correction data automatically from the captured image.
Caution
When [Pixel Black Correction Mode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー ー Display the results of
[Calibrate Pixel Black Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Default, User1,
User2, User3 Default Select the user area to which to save the gain correction value.
ー ー Generate gain correction data automatically from the captured image
Caution
When [PixelBlackCorrectionMode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー ー Display the results of [Calibrate Pixel Gain Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Lens1, Lens2,
Lens3 Off Correct the color aberration that occurs at the left and right edges due to
lens characteristics.
Chromatic Aberration Correction
Selector R Channel,
B Channel R Channel Specify the channel for which to perform [Chromatic Aberration Correction
Lens1,2,3].
Chromatic Aberration Correction ー 0
Set the amount of correction for [Chromatic Aberration CorrectionLens1, 2, 3].
[Setting range]
R, B Channel -4 〜 4 (step 0.1)
Setting range Default value Description
Corrects the spatial pixel differences individually for the R, G, and B lines
captured by the trilinear line sensor.
ー Default Select area to save.
[Seeting range] Off, Default, User1, User2, User3
Manual, Auto Manual Set the spatial compensation mode.
Red, Green, Blue ー Select the channel.
Spatial Compensation Value 0〜8 step 0.1 0 Set the compensation value for each channel.
Forward Direction,
Reverse Direction Forward Direction Set the direction moving objects.
ー Line4 (TTL In 1) Select the input to use for obtainning the movement direction information for
the object.
*) This setting is valid in SpatialCompensationMode : Auto .
[Setting range]
Low, Hight, Line5(OptIn1), Line4(TTLIn1), Line10(TTLIn2), Line13(TTLIn3),
EncoderDirection
0.5 〜 2.0 Step 0.1 1.0 Set the amount of movement in pixels of the imaging subject within the sensor
during a single trigger.
*) This setting is valid in SpatialCompensationMode : Auto .
Pixel Gain Calibration Result
Chromatic Aberration Correction Mode
r） Correction
Pixel Black Correction Mode
Item
Calibrate Pixel Black Correction
Pixel Black Calibration Result
Pixel Gain Correction Mode
Item
r） Spatial Control
Spatial Control
Spatial Compensation Mode
Spatial Compensation Selector
Object Direction
Object Direction Source
Spatial Compensation Distance
Calibrate Pixel Gain Correction
SW-4000TL-10GE
— 54 —