JAI SW-4000Q-SFP, Руководство пользователя

Страница: 56 / 68

Setting range Default value Description
Display information on transport layer control.
ー 12288 Display the payload size.
ー ー Select the supported options for GigEVision.
[Setting range]
SingleLink, MultiLink, StaticLAG, DynamicLAG, PAUSEFrameReception, PAUSEFrameGeneration,
IPConfigurationLLA, IPConfigurationDHCP, IPConfigurationPersistentIP, StreamChannelSourceSocket,
StandardIDMode, MessageChannelSourceSocket, CommandsConcatenation, WriteMem, PacketResend,
Event, EventData, PendingAck, IEEE1588, Action, UnconditionalAction, ScheduledAction,
PrimaryApplicationSwitchover, ExtendedStatusCodes, ExtendedStatusCodesVersion2_0, DiscoveryAckDelay,
DiscoveryAckDelayWritable, TestData, ManifestTable, CCPApplicationSocket, LinkSpeed, HeartbeatDisable,
SerialNumber, UserDefinedName, StreamChannel BigAndLittleEndian, StreamChannel IP Reassembly,
StreamChannel Multi Zone, StreamChannel PacketResendDestination, StreamChannel AllInTransmission,
StreamChannel UnconditionalStreaming, StreamChannel ExtendedChunkData
GevSupportedOption True, False ー Display whether support for the function selected in
GevSupportedOptionSelector is enabled or disabled.
0 0 The value for this item is fixed at 0.
GevMACAddress
ー ー Display the MAC address.
GevPAUSEFrameReception True, False False Controls whether incoming PAUSE Frames are handled on the given logical link.
GevPAUSEFrameTransmission True, False False Controls whether PAUSE Frames can be generated on the given logical link.
GevCurrentIPConfigurationLLA True True Display whether the current IP configuration is calibrated by LLA (link-local
address). (fixed at [True])
GevCurrentIPConfigurationDHCP True, False True Select whether to set the IP configuration to DHCP.
GevCurrentIPConfigurationPersistentIP True, False True Select whether to set the IP configuration to Persistent IP.
GevCurrentIPAddress ー ー Display the IP address.
GevCurrentSubnetMask ー ー Display the subnet.
GevCurrentDefaultGateway ー ー Display the default gateway.
GevIPConfigurationStatus None, PersistentIP, DHCP,
LLA, ForceIP, ー Display the current IP configuration status.
GevPersistentIPAddress ー ー Set the persistent IP address.
GevPersistentSubnetMask ー ー Set the persistent subnet mask.
GevPersistentDefaultGateway ー ー Set the persistent default gateway.
ー Unknown Indicates the expected accuracy of the device clock when it is the
grandmaster, or in the event it becomes the grandmaster.
[Setting range]
Within25ns, Within100ns, Within250ns, Within1us,
Within2p5u, Within10us, Within25us, Within100us,
Within250us, Within1ms, Within2p5ms, Within10ms,
Within25ms, Within100ms, Within250ms, Within1s,
Within10s, GreaterThan10s, AlternatePTPProfile, Unknown, Reserved
ー ー Display the status of IEEE 1588 clock.
[Status]
Initializing, Faulty Disabled, Listening PreMaster, Master Passive, Uncalibrated Slave
Version 1 1, Version 2 0 Version 1 1 Selects the GigE Vision version to control extended status codes for.
GevGVCPExtendedStatusCodes True, False ー Enables the generation of extended status codes.
True, False ー Enables the generation of PENDING_ACK.
Off, On Off Enables the extended IDs mode.
ー OpenAccess Controls the device access privilege of an application.
[Setting range]
OpenAccess, ExclusiveAccess, ControlAccess, ControlAccessSwitchoverActive
ー ー Returns the UDP source port of the primary application.
ー ー Returns the address of the primary application.
ー ー Controls the port to which the device must send messages. Setting this value
to 0 closes the message channel.
ー ー Controls the destination IP address for the message channel.
ー ー This feature indicates the source port for the message channel.
0:RGB, 1:NIR 0:RGB Selects the stream channel to control.
GevSCPHostPort ー ー Controls the port of the selected channel to which a GVSP transmitter must
send data stream or the port from which a GVSP receiver may receive data
stream. Setting this value to 0 closes the stream channel.
GevSCPSFireTestPacket True, False False Sends a test packet. When this feature is set, the device will fire one test packet.
GevSCPSDoNotFragment True, False False The state of this feature is copied into the "do not fragment" bit of IP header
of each stream packet. It can be used by the application to prevent IP
fragmentation of packets on the stream channel.
GevSCPSPacketSize (B) 576〜16366 1476 Set the packet size.
GevSCPD 0〜4294967295 0 Controls the delay (in GEV timestamp counter unit) to insert between each
packet for this stream channel.
GevSCDA ー ー Controls the destination IP address of the selected stream channel to which a
GVSP transmitter must send data stream or the destination IP address from
which a GVSP receiver may receive data stream.
GevSCSP ー ー Indicates the source port of the stream channel.
PlayloadSize (B)
o） Transport Layer Control
Gev IEEE 1588 Clock Accuracy
Gev IEEE 1588 Status
GevMCDA
GevMCSP
GevStreamChannelSelector
GevGVCPExtendedStatusCodesSelector
GevInterfaceSelector
GevSupportedOptionSelector
GevGVSPExtendedIDMode
GevCCP
GevPrimaryApplicationSocket
GevGVCPPendingAck
GevPrimaryApplicationIPAddress
GevMCPHostPort
Item
SW-4000Q-SFP
— 56 —