SP-5000M-CXP4 / SP-5000C-CXP4
- 52 -
8.3.3 LUT value
This is the “adjusted” or “output” pixel value for a given LUT index. It has a range of 0 to 4095 (12-
bit) and is automatically scaled to the bit depth of the current operating mode (8-bit or 10-bit).
Note: linear interpolation is used if needed to calculate LUT values between index points. In the
color mode, the LUT function works the same regardless of the color of the pixel.
Output Data = Video IN x LUT data
Fig. 29 LUT value
8.3.4 Associated GenICam registers
GenICam
Name
Access
Values
Category
Gamma
R/W
0 to 15
Analog Control
JAI LUT Mode
R/W
Off / Gamma / LUT
Analog Control
LUT Selector
R/W
Mono (for mono)
Red/Green/Blue (for Color)
LUT Control
LUT Index
R/W
0 to 255
LUT Control
LUT Value
R/W
0 to 4095
LUT Control
8.4. Gamma
This command is used to set gamma between gamma 0.45 and gamma 1.0 (OFF) in 16 steps.
The gamma value is an approximate value.
Fig. 30 Gamma compensation
画素欠陥が
If there is no data, use
adjacent data on both sides
Average data is used for
compensation
