JAI SP-12401M-USB, Руководство пользователя

Страница: 61 / 77

SP-12401M-USB/SP-12401C-USB
— 61 —
Setting range Default value Description
0〜10000 0 PendingAck function test command.
The camera waits for TestPendingAck (ms)
time and returns an Ack response.
Setting range Default value Description
Display information on transport layer
control.
Display the payload size.
Geometry_1X_1Y Geometry_1X_1Y Set the transfer method (tap configuration)
of images transferred from the camera at
one time.
Setting range Default value Description
Configure pulse generator settings.
1〜4096 165 Set the division value for the prescaler (12
bit) using PixelClock as the base clock.
0.0181274〜74.25 0.45 Set the clock used for the pulse generator.
This value is calculated using the
[ClockPreScaler] value as a base.
PulseGenerator0,
PulseGenerator1,
PulseGenerator2,
PulseGenerator3 PulseGenerator0 Select the pulse generator.
PulseGeneratorLength 1〜1048575 30000 Set the maximum count-up value as a clock
count.
PulseGeneratorLengthMs (ms)
1 / PulseGeneratorClock (MHz)
〜1048575 /
PulseGeneratorClock (MHz)
66.6667 Set the maximum count-up value in
milliseconds.
This value is calculated using the
[PulseGeneratorLength] value as a base.
The setting range varies depending on the
[ClockPreScaler] value.
PulseGeneratorFrequency (Hz) PulseGeneratorClock (MHz) ÷
1048575 x 1000000 〜
PulseGeneratorClock (MHz) x
1000000 Set the maximum count-up value as a
frequency.
This value is calculated using the
[PulseGeneratorLength] value as a base.
PulseGeneratorStartPoint 0 〜 1048574 0 Set the start point of the High interval as a
clock count. When the counter reaches this
value, the output will be 1.
PulseGeneratorStartPointMs
(ms) 0 〜 1048575 /
PulseGeneratorClock (MHz) 0 Set the start point of the High interval in
milliseconds.
When the counter reaches this value, the
output will be 1.
The setting range varies depending on the
[ClockPreScaler] value.
PulseGeneratorEndPoint 1 〜 1048575 15000 Set the start point of the Low interval as a
clock count. When the counter reaches this
value, the output will be 0.
Item
Item
Item
DeviceTapGeometry
PlayloadSize (B)
TestPendingAck (ms)
PulseGeneratorSelector
PulseGeneratorClock (MHz)
ClockPreScaler
n）PulseGenerator
l）TestControl
m）TransportLayerControl