JAI SP-12000M-CXP4-XT, Руководство пользователя

Страница: 50 / 63

— 50 —
SP-12000M-CXP4 / SP-12000C-CXP4
Item Setting range Default value Description
DeviceTemperature — — Displays the internal temperature (°C) of
the camera.
DeviceReset — — Reset the device.
b) Image Format Control Configure image format settings.
SensorWidth — 4096 Displays the maximum image width.
SensorHeight — 3072 Displays the maximum image height.
SensorDigitizationTaps 10bit
12bit
10bit Displays the digital tones output from the
sensor.
WidthMax 4096 4096 Displays the maximum image width.
HeightMax 3072 3072 Displays the maximum image height.
Width 128 to 4096 4096 Set the image width.
Height 16 to 3072 3072 Set the image height.
OffsetX 0 to 3968 0 Set the horizontal position.
OffsetY 0 to 3056 0 Set the vertical position.
BinningHorizontal 1, 2 1 Set the number of pixels in the horizontal
direction for which to perform binning.
BinningVertical 1, 2 1 Set the number of pixels in the vertical
direction for which to perform binning.
PixelFormat SP-12000M-CXP4:
8 Bit Monochrome,
10 Bit Monochrome,
12 Bit Monochrome
(Video Process Bypass
mode only)
SP-12000C-CXP4:
8 Bit BayerGB,
10 Bit BayerGB,
12 Bit BayerGB
(Video Process Bypass
mode only)
SP-12000M-CXP4:
8 Bit Monochrome
SP-12000C-CXP4:
8 Bit BayerGB
Set the pixel format.
TestPattern Off,
Grey Horizontal Ramp,
Grey Vertical Ramp,
Grey Horizontal
RampMoving,
HorizontalColorBar
(color only),
VerticalColorBar (color
only),
MovingColorBar (color
only)
Off Select the test image.
TapGeometry 0: Tap_1X_1Y 0: Tap_1X_1Y Displays the TapGeometry settings.
c) Acquisition Control Configure image acquisition settings.
AcquisitionMode Continuous Select the image acquisition mode.
AcquisitionStart — — Start image acquisition.
AcquisitionStop — — Stop image acquisition.
AcquisitionFrameCount 1 to 65535 153 In [Multi Frame] mode, set the number of
frames to acquire.
Acquisition Frame Rate*
* Frame period depends on
ROI, pixel format, and
binning mode selected."
0.125 to 189.7* 94.8767 In [Multi Frame] mode, set the number of
frames to acquire.
* The fastest value depends on the
setting of the Link Config.
AcquisitionStatusSelector
AcquisitionStatus
TriggerSelector Acquisition Start,
Acquisition End,
Frame Start
Frame Start Select the trigger operation.
TriggerMode Off, On Off Select the trigger mode.
TriggerSoftware — — Execute a software trigger
TriggerSource Low, High, Software, P
ulse Generator 0,
User Output 0,
User Output 1,
Line 4, Line 5,
Line 10, Line11,
NAND0 Out,
NAND1 Out
Line 4 Select the trigger signal source.
TriggerActivation Rising Edge,
Falling Edge,
Level High, Level Low
Rising Edge Select the polarity of the trigger signal
(i.e., location of signal at which trigger is
applied).
TriggerOverlap Off, On Off Select the trigger overlap operation.
ExposureMode Off, Timed,
Trigger Width
Timed Select the exposure mode.