— 17 —
SP-12000M-CXP4 / SP-12000C-CXP4
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory default settings are as follows. Change the settings as necessary.
Factory default values
Item
Default value
Image Format Control
Width
4096 (pixels)
Height
3072 (pixels)
Offset X (horizontal position)
0 (pixels)
Offset Y (vertical position)
0 (pixels)
Pixel Format
SP-12000M-CXP4: 8 Bit Monochrome
SP-12000C-CXP4: 8 Bit Bayer GB
You can specify the image acquisition area. For details, see “ROI (Regional Scanning Function)” (page 39).
1
Select the [Feature Properties] tab, and select the item you want to configure under [Image
Format Control].
when a configurable item is selected.
Note
Settings can only be changed when image acquisition on the camera is stopped. If an item is grayed out and
does not appear even when you select it, click
(Stop Acquisition) to stop image acquisition.
2
Click and change the setting value.
Example: When changing [Width]
