JAI SP-12000M-CXP4-XT, Руководство пользователя

Страница: 57 / 63

— 57 —
SP-12000M-CXP4 / SP-12000C-CXP4
Specifications
Item SP-12000M-CXP4 SP-12000C-CXP4
Scanning system Progressive scan, 1 tap
Synchronization Internal
Interface CoaXPress Ver. 1.0
Image sensor APS-C monochrome CMOS APS-C Bayer color CMOS
Aspect ratio 4:3
Image size (effective image) 22.5 (H) × 16.9 (V), 28.16 mm diagonal
Pixel size 5.5 (H) × 5.5 (V) μm
Effective image pixel output 4096 (H) × 3072 (V) 4096 (H) × 3072 (V)
Acquisition Frame
Rate (max)
❖
The minimum
value is 0.125
fps for all.
8-bit H1, V1 189 fps 189 fps
Binning H1, V2 189 fps N/A
H2, V1 189 fps N/A
H2, V2 189 fps N/A
10-bit H1, V1 132 fps 132 fps
Binning H1, V2 132 fps N/A
H2, V1 132 fps N/A
H2, V2 132 fps N/A
EMVA 1288 parameters
Absolute sensitivity
Maximum SN ratio
At 10-bit output
35.54p ( λ = 525 nm)
40.45 dB
At 10-bit output
49.24p ( λ = 525 nm)
36.63 dB
SN ratio (traditional method) 53 dB (typical)
(0 dB gain, Black)
50 dB (typical)
(0 dB gain, Green Black)
Digital image
output format
Full pixel 4096 (H) × 3072 (V) Bayer 4096 (H) × 3072 (V)
ROI Width 128 to 4096, 16 pixels/step 128 to 4096, 16 pixels/step
Offset X 0 to 3968, 16 pixels/step 0 to 3968, 16 pixels/step
Height 16 to 3072, 2 lines/step 16 to 3072, 2 lines/step
Offset Y 0 to 3056, 2 lines/step 0 to 3056, 2 lines/step
Binning H 1 4096 (H) 4096 (H)
2 2048 (H) —
V 1 3072 (V) 3072 (V)
2 1536 (V) —
Pixel Format Mono8, Mono10 BayerGB8, BayerGB10
Acquisition modes Continuous, Single Frame, Multi Frame (1 to 65535)
Trigger selector Acquisition Acquisition Start, Acquisition Stop
Exposure Frame Start
Exposure modes Off, Timed (EPS), Trigger Width (PWC)
Trigger options OFF, PIV
Trigger overlap Read Out, Off
Trigger input signals Line 4 (TTL Input1), Line 5 (Opto Input), Line7 (CXP In),
Line 10 (TTL Input2), Line 11 (LVDS Input),
Software, PG (0-3), NAND Out (0-1)
Option filter 7 steps (Off, 10 μs (Typ), 100 μs, 500 μs, 1ms, 5ms, 10ms)
Exposure modes Timed 15 or 20 μs (min) to 8 s (max), variable unit: 1 μs
❖
Performance verified for up to 1 second.
Trigger Width 15 μs (8 bit) or 20 μs (10 bit) (min) to ∞ (max)
❖
Performance verified for up to 1 second.
Auto exposure (Exposure Auto) Off, Continuous
Auto exposure response speed
(AGC/ASC Control Speed)
1 to 8
Video Send Mode Selector Normal ROI, Multi ROI (1 to 32), Trigger Sequence,
Command Sequence
Digital I/O Line Selector (12P/AUX): GPIO IN / GPIO OUT
Black level
adjustment
Reference level 33.5LSB (during 10-bit output) (average value of 100 × 100)
Video level adjustment range 0 to 100 (during 10-bit output)
Adjustment range ±64LSB against reference level (during 10-bit output)
Resolution adjustment 1 STEP = 0.25LSB