JAI RM-670, Руководство пользователя

Страница: 77 / 82

Appendix 77
RM-67X Series
8.3.95 Window Display
Function Command String Camera Response
Set Window Display State :WDS=[D]<cr> :o<cr>
Turns the display of the window for ALC control on and off.
[D] is the state value. This command applies to camera
models TM-770, TMC-773, and TMC-775.
0 = ALC window display off.
1 = ALC window display on.
Get Window Display State
:WDS?<cr> :oWDS[D]<cr>
Enquire current state of the ALC Window display. [D] is the
current state. This command applies to camera models TM-
770, TMC-773, and TMC-775.
0 = ALC window display off.
1 = ALC window display on.
8.3.96 Window Size Control (Obsolete in firmware 1.60 – replaced by WDS)
Note: This function has been replaced by the Window Display command (WDS) beginning in
firmware version 1.60.)
Function Command String Camera Response
Set Window Size :WSZ=[D]<cr> :o<cr>
Set the window size for ALC control. [D] is the size parameter.
This command applies to camera models TM-770, TMC-773, and
TMC-775.
0 = Center window.
1 = Full window.
Get Window Size
:WSZ?<cr> :oWSZ[D]<cr>
Enquire current window size for ALC control. [D] is the current
size value. This command applies to camera models TM-770,
TMC-773, and TMC-775.
0 = Center window.
1 = Full window.
8.3.97 WXN – Min ALC Window X Value
Function Command String Camera Response
Get ALC X Minimum :WXN?<cr> :oWXN[DDD]<cr>
Enquire minimum allowable value for ALC window X coordinate
values. Different camera models may have a different value
range.
8.3.98 WYN – Min ALC Window Y Value
Function Command String Camera Response
Get ALC Y Minimum
:WYN?<cr> :oWYN[DDD]<cr>
Enquire minimum allowable value for ALC window Y coordinate
values. Different camera models may have a different value
range.