JAI RM-2040GE Series Скачать руководство пользователя страница 41

Страница: 41 / 68

Configuring the Camera

RM/TM-2040GE Series

UserScanAreaStart

: sets the starting line of the User Programmable scan area. First line has a value of 0 and

corresponds to the top of the image sensor. For color cameras (TMC/RMC-2040GE) this value changes the Bayer

pattern of the captured image. Sets PixelFormat to BayerBG for odd value, and BayerGR for even value.

UserScanAreaLines

: sets the number of lines for the height of the User Programmable scan area.

TestImageSelector:

shows a software generated test pattern. Use this feature for debugging purposes.

Available options are:

•

Off: turn off test pattern generator and resume normal operation.

•

DeviceSpecific: shows diagonal lines on black background. Generated by the camera’s CPU.

•

IPEngineTestPattern: shows horizontal striped gradients running right to left.

5.4

Image Preprocessing

As temperature changes the image sensor can produce defective pixels in images, this feature will attempt to

compensate this phenomenon and produce a cleaner image. Run the White Blemish Calibration before using

Blemish Compensation.

•

BlemishCompensation

: enables or disables Blemish Compensation.

•

WhiteBlemishCalibration

: this is done to calibrate the camera so Blemish Compensation can be run. This

is only necessary after a camera has been powered off and restarted. Cover the lens with the lens cap

before calibrating.

5.5

LUT (Look Up Table)

The camera’s Lookup Table is used for dynamic range control when the camera is in 8, or 10-bit output mode.

Содержание RM-2040GE Series





































































Результаты поиска

Содержание RM-2040GE Series

Отзывы:

JAI RM-2040GE Series, Руководство пользователя, Страница: 41 / 68

Результаты поиска

Содержание RM-2040GE Series

Отзывы: