JAI RM-2040GE Series Скачать руководство пользователя страница 38

Страница: 38 / 68

RM/TM-2040GE Series

Configuring the Camera

Figure 21.

AnalogControls Category

GainSelector:

select the video channel that GainRaw will affect.

Available choices:

•

All: entire image.

•

Tap2: right channel.

GainRaw:

controls the Gain value.

GainAutoBalance:

use this feature to balance the left and right channel’s Gain values. Make sure the camera is

pointing at a uniform light source. The balance is done once and may be repeated if needed. This process may

take a long time (~3min), during which the value will stay at “Once”. Programmatically, the developer should

poll the value to check status after turning on the feature to Once.

BlackLevelSelector:

select the video channel that BlackLevelRaw will affect.

Available choices:

•

All: entire image.

•

Tap2: right channel.

BlackLevelAutoBalance:

use this feature to continuously auto balance the channels’ Black Level.

5.3

Image Size Controls

These controls allow you to make adjustment to the image’s size, scan mode, and tap selection. Please see

section 3.1 for a table of possible image sizes and modes.

Содержание RM-2040GE Series





































































Результаты поиска

Содержание RM-2040GE Series

Отзывы:

JAI RM-2040GE Series, Руководство пользователя, Страница: 38 / 68

Результаты поиска

Содержание RM-2040GE Series

Отзывы: