JAI RM-2030CL, Руководство пользователя

Страница: 20 / 54

TM/TMC/RM/RMC-2030CL
10 GUI Features
Figure 19. Gamma.45 imitates human eye sensitivity when creating an image.
The knee setting allows two adjustments in the light gathering configuration of the LUT to permit the camera
to correct images as they are captured. It is possible to set knees on any of the drop down settings by clicking
on the existing curve and moving it to the desired configuration. If a drop-down menu setting is selected
without adjusting the knees, the camera sets the default.
Figure 20. The setting does not activate until the Send Knees button is clicked.
2.1.7 (c) Knee Control
The Knee Control graphical control allows you to change two knee point values visually by clicking and dragging
the “knee line.” You may also enter X1, Y1, X2, Y2 values directly to adjust the knee curve. When you have
chosen the value you want and are ready to set this value to the camera, click the “Send Knees” button.
Note: The use of the Knee LUT may interfere with the Auto Level Control (ALC).
2.1.8 Rx TX Report Frame
This frame of the main GUI window allows you to view the result of actions taken with the Dual-Tap AccuPiXEL
software. Clicking on the “Report” button also sends a command which reads out the current Dual-Tap
AccuPiXEL software settings. This reading can be read using Table 7, “Command Responses,” on page 36.
Figure 21. Click “Report” for current software setting information.