manualshive.com logo in svg

JAI RM-2030CL, Руководство пользователя

JAI RM-2030CL - высококачественная видеокамера с функциями передачи изображения в реальном времени. Вам необходимо загрузить пользовательское руководство с нашего сайта бесплатно, чтобы узнать о всех возможностях этой камеры. Всегда загружайте его с manualshive.com.

Поделиться
Скачать
background image

 

 

 

 

 

 

Introduction 1

 

TM/TMC/RM/RMC-2030CL 

 

 
 

 
 

Dual-Tap TM-2030CL Operation Manual 

1

 

Introduction 

The Dual-Tap AccuPiXEL software offered for the TM-2030CL is camera control software. It is not used in image 
capture, but rather to configure camera functionality. The Cam2Net software and Dual-Tap AccuPiXEL software 

have the same capabilities. The Dual-Tap AccuPiXEL software is not needed to use the camera. 

If you find it more comfortable to use, or the AccuPiXEL software seems more compatible with your system, 
then it may be used instead of Cam2Net to configure camera functionality. The Cam2Net and AccuPiXEL 

software can not run simultaneously. 

The Dual-Tap AccuPiXEL series cameras are high-resolution, progressive scan cameras with JAI Inc.- proprietary 

LUT control and other excellent features. The software for these cameras was developed to function as 
standard software for the entire Dual-Tap AccuPiXEL series, and can open either the RS-232 serial port (COM) 

or Camera Link. Camera Link users must physically install the Camera Link frame grabber board into the PC. 
They must also install the Camera Link API (clserXXX.dll) software. These cameras are specially designed to 

capture images in progressive scan (non-interlace) format, producing a full frame of electronic shutter images, 
as well as normal images. 

Although this software works with all AccuPiXEL cameras, the interface for the TM-2030CL series appears 
different from other cameras compatible with this same software, and has various capabilities, depending on 
the camera model the software is accessing. The TM-2030CL series software is therefore, specifically 
documented in this section 

1.1

 

Software Installation 

Following are the instructions to install the Dual-Tap AccuPiXEL series camera-control software on a PC. 

1.1.1

 

Before Installing Dual-Tap AccuPiXEL Series Camera-Control Software 

Please note the following requirements. 

•

 

Your computer must be running Microsoft Windows 2000, or Windows XP. 

•

 

The software requires one available communication port that is not in conflict with other peripherals such 
as the mouse or modem. 

•

 

Installation of the software requires 2.4 MB of free space in your PC hard disk. 

1.1.2

 

Installing the Software 

To install the Dual-Tap AccuPiXEL series camera-control software, obtain the software from the JAI web site 
and run “Setup.exe.” The installer will direct you to install the application code. 

If dual tap software is already installed on your computer, uninstall the software using the steps in the 
Uninstall section. 

1.

 

To obtain the Dual-Tap software visit the JAI Inc. web site at http://www.jai.com 

2.

 

Click the Support link 

3.

 

Click the Software Downloads link under the Customer Support menu 

4.

 

Select the camera model number by clicking in the option button. 

5.

 

Select either “Open” or “Save” on the install dialog box 

Note:  The file is compressed, and uses the decompression program installed on your computer. WinZip is used 

in this example.Windows XP has an unzip capability as part of the operating system. 

Содержание RM-2030CL























































Отзывы:

Нет отзывов

Похожие инструкции для RM-2030CL

Olympus 2000 Repair Manual preview
2000
Бренд: Olympus Страницы: 46
GE C1440W Käyttöopas preview
C1440W
Бренд: GE Страницы: 76
Tamron A009 User Manual preview
A009
Бренд: Tamron Страницы: 2
Halo S3 User Quick Manual preview
S3
Бренд: Halo Страницы: 3
vds IRC-320GE Series Manual preview
IRC-320GE Series
Бренд: vds Страницы: 41
Xoro DPF 12 B1 Quick Start Manual preview
DPF 12 B1
Бренд: Xoro Страницы: 33
Olympus OM-10 Troubleshooting Manual preview
OM-10
Бренд: Olympus Страницы: 15
LaserLiner ThermoXplorer Pro User Manual preview
ThermoXplorer Pro
Бренд: LaserLiner Страницы: 121
Velleman INHA515 (DVM1500) User Manual preview
INHA515 (DVM1500)
Бренд: Velleman Страницы: 41
Olympus Sigital Vision D-620L Instructions Manual preview
Sigital Vision D-620L
Бренд: Olympus Страницы: 200
Quanmax QDSP-208C User Manual preview
QDSP-208C
Бренд: Quanmax Страницы: 38
FujiFilm X-Prol Quick Manual preview
X-Prol
Бренд: FujiFilm Страницы: 4
Dahua LDH SAI200 Series Quick Start Manual preview
LDH SAI200 Series
Бренд: Dahua Страницы: 48
QHYCCD QHY268PRO M Manual preview
QHY268PRO M
Бренд: QHYCCD Страницы: 24
MAXXMEE 04502 Operating Instructions Manual preview
04502
Бренд: MAXXMEE Страницы: 80
Mikrotron Cube5 C Instruction Manual preview
Cube5 C
Бренд: Mikrotron Страницы: 85
Prestigio RoadRunner 585GPS User Manual preview
RoadRunner 585GPS
Бренд: Prestigio Страницы: 12
NEARITY AW-V415 User Manual preview
AW-V415
Бренд: NEARITY Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды