JAI LT-400CL Скачать руководство пользователя страница 46

Страница: 46 / 63

LT-400CL

8.24 Command PBS – Inquire the status of after pixel black correction

This command returns the status of the pixel black correction, with the following
parameters:

0=Shading correction not completed yet
1=Successful
2=Error 1 – Image was too bright
3=Error 2 – Image was too dark
4=Error 3 - Timeout occurred

8.25 Command PER – Programmable exposure – Red

This command allows individual setting of the exposure time of the Red channel. It is
only valid for the Shutter select mode.

Settings:

4800 to 1194752 clocks,
60 μs to 14.9ms in 12.5ns steps

Applicable mode:

TR=1 Shutter select mode

Associated functions:

EI (R and G exposure interlocked with G)

8.26 Command PEG – Programmable exposure – Green

This command allows individual setting of the exposure time of the Green channel. It is
only valid for the Shutter select mode.

Settings:

4800 to 1194752 clocks,
60 μs to 14.9ms in 12.5ns steps

Applicable mode:

TR=1 Shutter select mode

Associated functions:

EI (R and G exposure interlocked with G)

8.27 Command PEB – Programmable exposure – Blue

This command allows individual setting of the exposure time of the Blue channel. It is
only valid for the Shutter select mode.

Settings:

4800 to 1194752 clocks,
60 μs to 14.9 ms in 12.5ns steps

Applicable mode:

TR=1 Shutter select mode

Associated functions:

EI (R and G exposure interlocked with G)

Refer to chapter

6.3.2 Electronic shutter (Exposure)

for further details.

8.28 Command PGC – Pixel gain correction mode

This command enables (or disables) the “pixel gain” (flat-field) correction function,
which compensates for Pixel Response Non Uniformity (PRNU) for individual pixels.

Settings:

0=Off (Bypass)

1=Factory Setting (default)

2=User area

Associated functions:

Command PGR

Applicable modes:

All

Содержание LT-400CL
































































Результаты поиска

Содержание LT-400CL

Отзывы:

Похожие инструкции для LT-400CL

Бренды по названию

Популярные бренды

JAI LT-400CL, Руководство пользователя

Результаты поиска

Содержание LT-400CL

Отзывы:

Похожие инструкции для LT-400CL

Бренды по названию

Популярные бренды