JAI GOX-12409C-PGE, Руководство пользователя

Страница: 62 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
62
GevGVCPExtendedStatusCodesSele
ctor
Version1_1,
Version2_0
GevGVCPExtendedStatusCodes True, False
GevGVCPPendingAck True, False
GevGVCPExtendedIDMode Off, On
GevCCP
0:OpenAccess
1:ExclusiveAccess
2:ControlAccess
3:ControlAccessSwitchoverAc
tive
ー Controls the device access privilege of an application.
GevPrimaryApplicationSocket ー ー Returns the UDP source port of the primary application.
GevPrimaryApplicationIPAddress ー ー Returns the address of the primary application.
GevMCPHostPort 0 0
Controls the port to which the device must send messages.
Setting this value to 0 closes the message channel.
GevMCDA 0 0 Controls the destination IP address for the message channel.
GevMCSP ー 0 This feature indicates the source port for the message channel.
GevStreamChannelSelector 0 (Fixed) 0 Selects the stream channel to control.
GevSCCFGPacketResendDestina
tion
True, False False
Sends a test packet. When this feature is set, the device will fire one test
packet.
GevSCCFGAllInTransmission True, False False
GevSCCFGUnconditionalStreami
ng
True, False False
GevSCCFGExtendedChunkData True, False False
GevSCPInterfaceIndex 0 (Fixed) 0
GevSCPHostPort 0 (Fixed) 0 Controls the port to which the device must send messages.
GevSCPSFireTestPacket True, False False
GevSCPSDoNotFragment True, False False
The state of this feature is copied into the "do not fragment" bit of IP header
of each stream packet.
It can be used by the application to prevent IP fragmentation of packets on the stream channel.
GevSCPSPacketSize (B) 1476 ～ 12036 step 4 1476
This GigE Vision specific feature corresponds to
DeviceStreamChannelPacketSize and should be kept in sync with it.
It specifies the stream packet size, in bytes, to send on the selected channel for a GVSP
transmitter or specifies the maximum packet size supported by a GVSP receiver.
GevSCPD 0 ～ 4000000 step 8 0
Controls the delay (in GEV timestamp counter unit) to insert between each
packet for this stream channel.
This can be used as a crude flow-control mechanism if the application or the network
infrastructure cannot keep up with the packets coming from the device.
GevSCDA ー ー
Controls the destination IP address of the selected stream channel to which a
GVSP transmitter must send data stream or the destination IP address from
which a GVSP receiver may receive data stream.
GevSCSP ー ー Indicates the source port of the stream channel.
ActionControl
Configure settings for action control.
Item Setting range Default value Description
ActionDeviceKey
0x00000000 ～ 0xFFFFFFFF
ー
An action command is executed if this ActionDeviceKey matches the
DeviceKey contained in the action command message.
ActionSelector 1,2 1 select the ActionSelector.
ActionGroupMask
0x00000000 ～ 0xFFFFFFFF
ー
An action command is executed if the result of an AND operation of
GroupMask contained in this ActionGroupMask and an action command
message is not 0.
ActionGroupKey
0x00000000 ～ 0xFFFFFFFF
ー
An action command is executed if this ActionGroupKey matches the GroupKey
contained in the action command message.
ActionQueueSize