JAI GOX-12409C-PGE страница 5 Скачать руководство пользователя

Страница: 5 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)

Notice/Warranty/Certifications

Notice

The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan

and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the

use of its product and assumes no responsibility for any errors which may appear or for damages

resulting from the use of the information contained herein. JAI Ltd., Japan reserves the right to

make changes without notice.

Company and product names mentioned in this manual are trademarks or registered trademarks of

their respective owners.

Warranty

For information about the warranty, please contact your factory representative.

Certifications

CE compliance

As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC

(Electromagnetic compatibility), JAI Ltd., Japan declares that GOX-6409M-PGE, GOX-6409C- PGE,

GOX-12409M-PGE, GOX-12409C-PGE, GOX-20409M-PGE and GOX-20409C-PGE comply with the

following provisions applying to their standards.

EN 55032:2015(CISPR32:2015)

EN 55035:2017(CISPR35:2016)

FCC

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications to this unit not expressly approved by the party responsible for FCC

compliance could void the

user’s

authority to operate the equipment.

Содержание GOX-12409C-PGE
















































































Результаты поиска

Содержание GOX-12409C-PGE

Отзывы:

Похожие инструкции для GOX-12409C-PGE

Бренды по названию

Популярные бренды

JAI GOX-12409C-PGE, Руководство пользователя

Результаты поиска

Содержание GOX-12409C-PGE

Отзывы:

Похожие инструкции для GOX-12409C-PGE

Бренды по названию

Популярные бренды