JAI GOX-12409C-PGE, Руководство пользователя

Страница: 27 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
27
Acquisition Control
This camera has three Acquisition modes (SingleFrame, MultFrame, Continuous).
Use the AcquisitionControl settings to perform operations and settings for image capture.
SingleFrame
When the AcquisitionStart command is executed, one frame of image is captured.
MultiFrame
When the AcquisitionStart command is executed, the number of frames set in
AcquisitonFrameCount are acquired as images.
Continuous
When the AcquisitionStart command is executed, images will continue to be acquired until the
AcquisitionStop command is executed.
Changing the Frame Rate
When TriggerMode is disabled, you can change the frame rate in AcquisitionFrameRate.
Note :
•
When TriggerMode[FrameStart] is enabled, the AcquisitionFrameRate setting is disabled.
•
If the AcquisitionFrameRate is changed while outputting the frame images, the image’s
brightness may change significantly for the first few frames immediately after the change.