JAI GO-2400M-PGE Скачать руководство пользователя

Страница: 47 / 108

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

Main Functions

- 47 -

Notes:

*Height_s: Line scanned by the sensor.

**Height_g, Width_g: Height and width of output streams.

***12-bit binning is not supported.

Caution:

Although the maximum frame rate value is determined by the GigE bandwidth range,

when ROI is configured, the frame rate cannot exceed the sensor output's allowable frame rate
value.

Exposure Mode

Related Setting Items:

AcquisitionControl

The following exposure modes are available on the camera.

Exposure

Mode

Setting

Exposure Operation

OFF

Exposure control is not performed (free-running operation).

Timed

Mode in which control is performed using exposure time. Acquire images using an exposure time
configured beforehand on an external trigger.

Trigger
Width

Mode in which control of the exposure time is performed using the pulse width of the trigger input
signal. The exposure time will be the same as the pulse width of the trigger input signal. This
allows long exposure.

Note:

The settings for exposure control and triggers are related to each other. Be sure to

configure the settings described in “

Configure Exposure and External Trigger Settings

”.

Содержание GO-2400M-PGE













































































































Результаты поиска

Содержание GO-2400M-PGE

Отзывы:

Похожие инструкции для GO-2400M-PGE

Бренды по названию

Популярные бренды

JAI GO-2400M-PGE, Руководство пользователя

Результаты поиска

Содержание GO-2400M-PGE

Отзывы:

Похожие инструкции для GO-2400M-PGE

Бренды по названию

Популярные бренды