GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Miscellaneous
- 102 -
Specifications
Description
Gain Adjustment
Manual Adjustment
Range
0 dB to +24 dB 1 step = x0.01 (0.005 dB to 0.08 dB) (varies by
setting value)
Auto Gain
Off / Continuous
WB Gain*
R / B: - 7 dB ~ + 15 dB
、
1 Step = 0.1 dB
WB Area*
16 (4 × 4) Area
White Balance*
Off / Continuous / Once
*Color models only
Blemish Correction
Detection
Detect white blemishes using threshold values (black blemish correction
performed only at factory)
Correction
Interpolation using adjacent pixels (continuous blemishes not corrected)
Correctable
Pixels
256 Pixels
ALC
Adjusts exposure automatically using combination of AGC and auto shutter
Gamma
0.45, 0.6, 1.0 (3 steps available)
LUT
OFF: γ = 1.0
、
ON = 256 points can be set
Power Supply
6-Pin
Connector
Input range
DC +12 V to +24 V ±10% (via input terminal)
Current
220mA ± 20mA (at 12 V input, full pixel) (Typical)
Consumption
2.64W (at 12 V input, full pixel) (Typical)
PoE
Input range
DC 36 V to 57 V
Current
63mA ± 6mA (at 48 V input, full pixel) (Typical)
Consumption
3.02W (at 48 V input, full pixel) (Typical)
Lens mount
C-mount
Lens mount protrusion length of 9 mm or less is supported
Flange Back
17.526, tolerance: 0 mm to ~ -0.05 m
Optical filter (IR cut filter)
Mono: Not provided
Color: Half value of 670 nm
Verified performance temperature /
humidity
-5°C to +45°C / 20 to 80% (non-condensing)
Storage temperature / humidity
-25°C to +60°C / 20 to 80% (non-condensing)
Regulations
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE, KC
Dimensions (housing)
29mm × 29mm × 41.5mm (W x H x D)(excluding mount protrusions)
Weight
46g
Notes:
l
Approximately 5 minutes of warm-up are required to achieve these specifications.
l
Design and specifications are subject to change without notice.
