JAI BB-141GE Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 75

background image

BM-141GE / BB-141GE

32

8. Network configuration



For details of the network settings, please refer to the “Getting Started

Guide” supplied with the JAI SDK.

8.1.

GigE Vision Standard Interface

The  BM-141GE  and  BB-141GE  are  designed  in  accordance  with  the  GigE  Vision  standard.  In
transmits  digital  images  over  Cat5e  or  Cat6  Ethernet  cables.  All  camera  functions  are  also
controlled via the GigE Vision interface.

The  camera  can  operate  in  continuous  mode,  providing  an  endless  stream  of  images.  For
capturing individual images, related to a specific event, the camera can also be trigged. For
precise triggering, it is recommended to use a hardware trigger applied to the Hirose 12-pin
connector. It is also possible to initiate a software trigger through the GigE Vision interface.
However, when using software trigger, certain latency inherent to the GigE interface must be
anticipated.  This  latency,  that  manifests  itself  as  jitter,  greatly  depends  on  the  general
conditions and traffic on the GigE connection. The frame rate described in this manual is for
the ideal case and may deteriorate depending on conditions.

When using multiple cameras (going through a switch and/or a single path) or when operating
in a system with limited transmission bandwidth the Delayed Readout Mode and Inter-Packet
Delay functions can be useful.

8.2. Equipment to configure the network system

8.2.1 PC

The PC used should have the following performance or better
1) Recommended CPU

: Core2 Duo 2.4GHz or better,

Better than Core2 Extreme

2) Recommended memory

: 2Gbyte or more

3) Video card

: Better than PCI Express Bus Ver.1.0 x16

VRAM should be better than 256MByte, DDR2

4) Other

: The resident software should not be used

8.2.2 Cables

GigEVision configures the system by using 1000BASE-T.  (100BASE-T can be used with
some restriction. Refer to chapter 8.3.6). In the market, CAT5e (125MHz), CAT6
(250MHz) and CAT7 (600MHz) cables are available for 1000BASE-T. There are
crossover cables and straight through cables available. Currently, as most equipment
complies with Auto MDI/MDI-X, please use straight through cables. (Among crossover
cables, a half crossover type exists, which the Ethernet will recognize as 100BASE-T).

8.2.3 Network card (NIC)

The network card should comply with 1000BASE-T and also have the capability of
JUMBO FRAMES. When the jumbo frame size is set at a larger number, the load on the
CPU will be decreased. Additionally, as the overhead of the packet is decreased, the

transmission will have more redundancy.

«
...
30
31
32
33
34
...
»

Содержание BB-141GE












































































Отзывы:

Нет отзывов

Похожие инструкции для BB-141GE

Бренд: Samsung Страницы: 49

Бренд: Federal Signal Corporation Страницы: 20

Бренд: GE Страницы: 78

Бренд: MAGINON Страницы: 40

Бренд: Okina USA Страницы: 3

Бренд: Okina USA Страницы: 16

Бренд: D-Link Страницы: 41

Бренд: iDeaPLAY Страницы: 14

Бренд: Olympus Страницы: 148

Бренд: Canon Страницы: 164

PowerShot SD1200 IS Digital ELPH

Бренд: Canon Страницы: 41

E-330 - Evolt E330 7.5MP Digital SLR Camera

Бренд: Olympus Страницы: 116

Бренд: Speco Страницы: 13

Бренд: Xoro Страницы: 33

Бренд: Facina Страницы: 3

Бренд: Eborn Страницы: 3

e.Frame C/E Series

Бренд: Forenex Страницы: 20

Бренд: Walimex Pro Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды