JAI AD-130GE, Руководство пользователя

Страница: 16 / 87

AD-130GE
15
6.3. Sync Mode
AD-130GE has two sensors inside and these two sensors can be synchronized or operated
independently. This mode selection is activated by ―Sync mode feature‖.
Factory default setting is ―Async‖.
Sync
mode Video out
（
Pixel format
）
Trigger in Read out
(Partial, Smearless) Functions
(Shutter,others)
Sync
Sensor 1 and 2
can be set
independently
Trigger to sensor
1 operates sensor
2. Settings to sensor 1
applies to sensor 2.
Sensor 1 and 2
can be set
independently
Async Input trigger to
Sensor 1 and 2
independently Sensor 1 and 2 can be
set independently
Functions
SYNC ASYNC
RJ-45(GigE 1) RJ-45(GigE 2) RJ-45(GigE 1) RJ-45(GigE 2)
Sensor Bayer(sensor1) NIR(sensor2) Bayer(sensor1) NIR(sensor2)
Trigger input
○
←
Triggered by GigE1
○ ○
Output Bayer
RGB
Monochrome
Bayer
RGB
Monochrome
Shutter
○ ○ ○ ○
Partial scan
○
←
Follow the setting of
GigE 1
○ ○
Smearless
○
←
Follow the setting of
GigE 1
○ ○
In Sync mode, the trigger to Bayer also triggers to NIR.
6.4. Lens considerations
The AD-130GE is based on a dichroic prism, allowing precise separation of the visible (color)
and near-infrared parts of the spectrum.
Thanks to the compact design of the
prism, C-mount lenses can be used with
this camera. For optimal performance it
is strongly advised to use lenses designed
for 3CCD cameras with the AD-130GE.
These lenses have minimal chromatic
aberration, thus allowing both the visible
and near-IR images to be in focus. Be
sure to select a lens that does not have
any built-in IR filtering as this will disrupt
the proper operation of the near-IR
image channel.
Fig 8 Focal points for Visible and NIR lights
Visible area
Focus point
NIR area
Focus Point