Jäger S33-M110.01 S26, Руководство пользователя

Страница: 10 / 40

Technical description
Item no. 10501004, Revision 03 10 ( 40 )
4.4 Modification and repair
Modifications or alterations to the HF spindle are only permitted after prior
consultation with
Nakanishi Jaeger GmbH .
Only the service partners listed in the “Service and repair [
}
36] ” section are
authorized to open and repair the HF spindle.
Only approved accessories have been tested for operational safety and func-
tionality.
4.5 Improper operation
The high frequency spindle is only safe to operate for its designated use.
Ü
Observe the safety instructions in all sections of the manual to prevent
hazards to persons, the environment, the machine, or the HF spindle itself.
Failure to observe the safety instructions may invalidate any warranty claims
and compensation claims for damages.
5 Technical description
5.1 Connections of HF spindle
1 3
1 Electrical connection
3 Sealing air G 1/8"
5.2 Electrical connection
The HF spindle may only be operated with a frequency converter (FC).
Ü Check whether the current, voltage, and frequency data of the HF spindle
match the raw data for the frequency converter.
Ü
Use a motor supply line that is as short as possible.
Ü Adjust the speed of the HF spindle using the FC.
Ü Refer to the frequency converter manual for further information.