12
ADwin-Gold
Hardware Manual, Version 2.3
ADwin
Standard instructions
5. Inputs and Outputs
All inputs and outputs may only be operated according to the specifications
given (s. annex A-1 „Technical Data“). In case of doubt, ask the manufacturer
of the device, to which you want to connect the
ADwin-Gold
system.
Please avoid connecting and operating at the analog inputs when the
ADwin-
Gold
system is switched off.
In this case the input resistance can get in the
status of low impedance at the analog inputs, so that damages at the
ADwin-
Gold
and at other connected devices may occur, (see also annex A-1:
„Technical Data, Analog Inputs, Overvoltage - maximum permissible current).
For fast and easy programming there are standard instructions available in the
compiler
ADbasic
, which enable a user to easily measure or output data (see
also
ADbasic
manual). Use other instructions only if extremely time-critical or
special tasks require to do so.
More detailed information about the analog as well as the digital inputs and
outputs can be found in the following chapters.
The pin assignments of CONN.1 and CONN.2 can be found in chapter 5.3.
5. Inputs and Outputs
IN 1
IN 3
IN 5
IN 7
IN 9
IN 11
IN 13
IN 15
OUT 1
OUT 3
IN 2
IN 4
IN 6
IN 8
IN 10
IN 12
IN 14
IN 16
OUT 2
OUT 4
CONN. 1 (DIGITAL IN)
CONN. 2 (DIGITAL OUT)
LINK
POWER
GND
CONN. 3
CONN. 4
ADwin-
GOLD
analog
inputs
analog
outputs
power-
supply
LINK-
connector
GND-
connector
digital
inputs/outputs
additional
inputs/outputs
Figure 5-1: Schematic of
ADwin-Gold
